hydraulic hoses parker

Size – 1/4” , 5/16” , 3/8” , ½” , 5/8” , ¾” , 1” , 1-½”, 2' A Nylon braided hydraulic hose, often referred to in the context of SAE 100R6, is a low-pressure hydraulic hose typically used for return lines, anti-static systems, or low-pressure fluid transfer—especially when flexibility and light weight are important. 🧵 SAE 100R6 – Nylon Braided Hydraulic Hose: ✅ Construction: Tube: Oil-resistant synthetic rubber (often NBR). Reinforcement: One layer of textile braid (often nylon or polyester), not steel wire. Cover: Weather and oil-resistant synthetic rubber. 🔧 Key Specs: Pressure Rating: Up to 300–500 psi, depending on hose size. Temperature Range: Typically -40°C to +100°C (-40°F to +212°F). Size Range: Usually available in 1/4' to 2” ID. 🔄 Where It's Used: Return and suction lines (not for pressure lines). Fuel and lubrication lines. Industrial and agricultural low-pressure systems. Applications needing a lightweight, flexible, and non-metallic hose.

A high temperature hydraulic hose pipe is specially designed to handle elevated fluid and ambient temperatures, making it ideal for demanding environments like steel mills, foundries, and engine compartments. 🔥 High Temperature Hydraulic Hose – Key Features: Temperature Range: Typically -40°C to +135°C (-40°F to +275°F) Some specialty hoses can handle up to +150°C to +204°C (+300°F to +400°F), depending on the material. Tube Material: Made from high-temp resistant synthetic rubber like EPDM, Viton, or PTFE (Teflon). Reinforcement: Can be braided (1 or 2 wire) or spiral (4 or 6 wire) depending on pressure needs. Cover: May include heat-resistant fabric, silicone, or fire sleeves for added protection against radiant heat or hot oil spray. Common Examples: SAE 100R1/R2 with high-temp rubber SAE 100R5 (used in transport and air brake systems) PTFE hoses (with or without stainless steel braid) EN 857 and ISO 11237 hoses with heat resistance 🔧 Applications: Steel plants and glass factories Engine and transmission systems Mobile equipment near exhausts Hydraulic systems using hot oil, steam, or bio-oils

Size – 1/4” , 5/16” , 3/8” , ½” , 5/8” , ¾” , 1” , 1-½” , 2' 2-1/2' A high pressure hydraulic hose pipe is designed to handle extreme pressure in demanding hydraulic applications, often exceeding 4,000 psi and going up to 10,000 psi or more in some cases. 🔧 High Pressure Hydraulic Hose – Key Features: Reinforcement: Typically 4 or 6 layers of spiral-wound high-tensile steel wire. Designed to withstand impulse loads and pressure spikes. Common Standards: SAE 100R12, R13, R15 EN 856 4SP / 4SH Special ultra-high-pressure hoses may follow ISO 18752 or OEM specs. Pressure Ratings: R12: Up to ~4,000 psi R13: Up to ~5,000 psi R15: Up to ~6,000+ psi (even higher for small sizes) Ultra-high pressure hoses: Can reach 10,000+ psi Temperature Range: Generally -40°C to +121°C (-40°F to +250°F) Some hoses go higher with special synthetic covers or PTFE linings. Applications: Mining and tunneling equipment Construction and earth-moving machines Hydraulic presses and power units Offshore oil & gas rigs Water jetting or hydroblasting systems

Size – 1/4” , 1/2 ' , 5/8” , 3/4” , 1” , 1-½” , A spiral hydraulic hose is a type of heavy-duty hose designed for very high pressure applications and extreme working conditions. Unlike R1 or R2 hoses (which use braided wire reinforcement), spiral hoses use spiral-wound wire layers, which gives them superior strength and durability. 🔧 Spiral Hydraulic Hose – Key Features: Reinforcement: Multiple layers (typically 4 or 6) of spiral high-tensile steel wire. Wires are laid in alternating directions (left and right hand) for flexibility and strength. Common Types: SAE 100R9, R12, R13, R15 R13 & R15 are among the highest pressure-rated hoses. Pressure Rating: Can exceed 6,000 psi depending on the type and size. Maintains high-pressure performance even in large bore sizes. Temperature Range: Typically -40°C to +121°C (-40°F to +250°F), depending on the cover material and fluid type. Applications: Heavy machinery, mining, construction, offshore drilling rigs, and hydraulic systems with shock loads or pressure spikes.

Size – 1/4” , 5/16” , 3/8” , ½” , 5/8” , ¾” , ¾” , 1” , 1-½” , An R2 hydraulic hose (specifically SAE 100R2) is similar to an R1 hose but built for higher pressure applications. Here's how it stacks up: 🔧 SAE 100R2 Hydraulic Hose – Key Features: Construction: Tube: Oil-resistant synthetic rubber. Reinforcement: Two layers of high-tensile steel wire braid (vs. one in R1). Cover: Weather, abrasion, and oil-resistant synthetic rubber. Applications: Suitable for high-pressure hydraulic systems. Used in industrial machinery, mining, and heavy equipment. Pressure Ratings: Higher than R1 – usually ranges from 2,000 to 6,000 psi (140 to 415 bar), depending on hose size. Temperature Range: Typically from -40°C to +100°C (-40°F to +212°F). Hose Identification Example: SAE 100R2AT 3/8' WP 4800 PSI (a 3/8 inch hose rated for 4800 psi).

Size – 1/4” , 5/16” , 3/8” , ½” , 5/8” , ¾” , ¾” , 1” , 1-½” , An R1 hydraulic hose refers to a SAE 100R1 hose, which is a standard type of hydraulic hose used for low to medium pressure hydraulic systems. Here's a quick breakdown of what defines it: 🔧 SAE 100R1 Hydraulic Hose – Key Features: Construction: Tube: Oil-resistant synthetic rubber. Reinforcement: One layer of steel wire braid. Cover: Abrasion, weather, and oil-resistant synthetic rubber. Applications: Low to medium pressure hydraulic applications. Common in construction, industrial, and agricultural machinery. Pressure Ratings: Depends on the internal diameter – typically ranges from 1,300 to 3,200 psi (90 to 220 bar). Temperature Range: Typically from -40°C to +100°C (-40°F to +212°F), depending on the fluid type. Hose Identification Example: SAE 100R1AT 1/2' WP 2750 PSI (this would be a 1/2 inch hose with a 2750 psi working pressure).